210.85. Guide bush with collar, bronze coated, ~AFNOR
Material:
1.0503
Ø d2 induction hardened to 500+100 HV 10 Execution:
Bronze coated internal bore.
Diameter d2 and collar face precision ground.
up to Ø d1 = 25 tolerance G6
from Ø d1 = 32 tolerance G5 Note:
The guide bush is fixed with slotted nut 207.48.
Lubrication via funnel lubricating nipple with thread DIN 3405-A M8x1.
↗ Notes on sliding type guides at the beginning of chapter D.
↗ Matching guide combinations, see selection matrix at the beginning of chapter D.
↗ Assembly guide lines / Dimensional requirements and tolerances at the end of chapter D.
1.0503
Ø d2 induction hardened to 500+100 HV 10 Execution:
Bronze coated internal bore.
Diameter d2 and collar face precision ground.
up to Ø d1 = 25 tolerance G6
from Ø d1 = 32 tolerance G5 Note:
The guide bush is fixed with slotted nut 207.48.
Lubrication via funnel lubricating nipple with thread DIN 3405-A M8x1.
↗ Notes on sliding type guides at the beginning of chapter D.
↗ Matching guide combinations, see selection matrix at the beginning of chapter D.
↗ Assembly guide lines / Dimensional requirements and tolerances at the end of chapter D.
Log in to view price, availability, and order the product.
Products
Showing 1-10 of 12 items
| SKU | Guide diameter | Total length | |
|---|---|---|---|
| 210.85.016.016 | 16 mm | 16 mm | |
| 210.85.016.020 | 16 mm | 20 mm | |
| 210.85.020.021 | 20 mm | 21 mm | |
| 210.85.020.025 | 20 mm | 25 mm | |
| 210.85.025.026 | 25 mm | 26 mm | |
| 210.85.025.031 | 25 mm | 31 mm | |
| 210.85.032.031 | 32 mm | 31 mm | |
| 210.85.032.038 | 32 mm | 38 mm | |
| 210.85.040.039 | 40 mm | 39 mm | |
| 210.85.040.047 | 40 mm | 47 mm | |
| 210.85.050.041 | 50 mm | 41 mm | |
| 210.85.050.049 | 50 mm | 49 mm |