2022.13. Guide pillar with 5° pilot taper, to VW-Standard

2022.13. Guide pillar with 5° pilot taper, to VW-Standard

Material:
Steel, surface hardened
Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm

Execution:
precision ground
Ø d1 = 80 with 1 lifting thread M12

Application:
Floating support in upper half of trimming tools.

Note:
Guide pillar is recommended to be used only with guide elements with solid lubricant.
↗ Matching guide combinations, see selection matrix at the beginning of chapter D.
↗ Assembly guide lines / Dimensional requirements and tolerances at the end of chapter D.

SKU: 2022-13-
Order No
Guide diameter
Length
Log in to view price, availability, and order the product.

Products

Showing 1-10 of 29 items
SKU Guide diameter Length
2022.13.040.140 40 mm 140
2022.13.040.160 40 mm 160
2022.13.040.180 40 mm 180
2022.13.040.200 40 mm 200
2022.13.040.224 40 mm 224
2022.13.040.250 40 mm 250
2022.13.040.280 40 mm 280
2022.13.050.160 50 mm 160
2022.13.050.180 50 mm 180
2022.13.050.200 50 mm 200
2022.13.050.224 50 mm 224
2022.13.050.250 50 mm 250
2022.13.050.280 50 mm 280
2022.13.050.315 50 mm 315
2022.13.050.355 50 mm 355
2022.13.063.180 63 mm 180
2022.13.063.200 63 mm 200
2022.13.063.224 63 mm 224
2022.13.063.250 63 mm 250
2022.13.063.280 63 mm 280
2022.13.063.315 63 mm 315
2022.13.063.355 63 mm 355
2022.13.063.400 63 mm 400
2022.13.080.224 80 mm 224
2022.13.080.250 80 mm 250
2022.13.080.280 80 mm 280
2022.13.080.315 80 mm 315
2022.13.080.355 80 mm 355
2022.13.080.400 80 mm 400
truckWrenchchevron-leftAlertBrowse fileDownload fileDownloadFileImagePdfWordTextExcelPowerpointArchiveCsvAudioVideoSpinnerSpinnerReturn arrowVisibleInvisible