2022.12. Guide pillar with pilot tapper and groove, to Mercedes-Benz Standard
Material:
Steel, surface hardened
Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm Execution:
ground
Ø d1 = 80 without central hole with 1 lifting thread M12
from Ø d1 = 100 with central hole (through) and with 2 lifting threads M8 Note:
Secure with snap ring 2061.48.
Guide pillar is recommended to be used only with guide elements with solid lubricant.
↗ Matching guide combinations, see selection matrix at the beginning of chapter D.
↗ Assembly guide lines / Dimensional requirements and tolerances at the end of chapter D.
Steel, surface hardened
Surface hardness: 60 + 4 HRC, Hardness penetration 1,5 + 1 mm Execution:
ground
Ø d1 = 80 without central hole with 1 lifting thread M12
from Ø d1 = 100 with central hole (through) and with 2 lifting threads M8 Note:
Secure with snap ring 2061.48.
Guide pillar is recommended to be used only with guide elements with solid lubricant.
↗ Matching guide combinations, see selection matrix at the beginning of chapter D.
↗ Assembly guide lines / Dimensional requirements and tolerances at the end of chapter D.
Log in to view price, availability, and order the product.
Products
Showing 1-10 of 16 items
| SKU | Guide diameter | Length | |
|---|---|---|---|
| 2022.12.080.280 | 80 mm | 280 | |
| 2022.12.080.315 | 80 mm | 315 | |
| 2022.12.080.355 | 80 mm | 355 | |
| 2022.12.080.400 | 80 mm | 400 | |
| 2022.12.080.450 | 80 mm | 450 | |
| 2022.12.100.315 | 100 mm | 315 | |
| 2022.12.100.355 | 100 mm | 355 | |
| 2022.12.100.400 | 100 mm | 400 | |
| 2022.12.100.450 | 100 mm | 450 | |
| 2022.12.125.355 | 125 mm | 355 | |
| 2022.12.125.400 | 125 mm | 400 | |
| 2022.12.125.450 | 125 mm | 450 | |
| 2022.12.125.500 | 125 mm | 500 | |
| 2022.12.160.450 | 160 mm | 450 | |
| 2022.12.160.500 | 160 mm | 500 | |
| 2022.12.160.560 | 160 mm | 560 |